Bicycle Trailer Coupler Directions

an,Remove the left (non-drive side) rear cycle axle nut. Removal aspiration require one adaptable wring unless the axle features a quick-release. This disconnect ambition be located aboard the right (drive-side) of the axleflip the loosen to the open position and detach the left side nut with your fingers.


2,Install any washers charted for use with the joint onto the left side of the axle until they are flush opposition the side of the bike.


3,Fit the joint over the left side of the axle. The joint will have two openingsone because the axle and one because the bike trailer shuffle bar. The smaller of the two ambition qualified over the axle. The larger opening ambition afterward be positioned directly underneath the axle.


4,Fit the annihilate of the double bicycle trailer shuffle bar into the tremendous opening among the coupler Secure the tug bar apt the joint along inserting the attached metal pin through side of the coupler and drag bar abolish.


5,Pass the belt at the kill of the drag bar around the bike seat stay (the tubing that extends vertically from the rear axle) and clip the annihilate amid place approach the annihilate of the drag bar.