Repair a Hole in Your Party Tent

1,Set up your party tent a day or so before you are to use it. Get inside the tent and look for sunlight leaking through the tent. You’ll see holes clearly when you’re inside the blue party tent.
2,Cut two equal patches of tent tape or sail tape that will completely cover the tear or hole by at least a half-inch on all sides. If the patch is not round, round the corners. Sail tape is essentially a polymeric material with an adhesive back. You can buy different colors.
3,Clean the marked area with an alcohol wipe or cotton dipped in alcohol. Clean both sides of the tent.
4,Peel off the adhesive backing and carefully place the patch on the tent. Do the same on the other side of the tent directly opposite the first patch.
5,Dab the edges of the patch on both sides with some of the clear repair adhesive that came with your white party tent. This will keep the patch from peeling. If you don’t have any repair adhesive, seam sealer also works.
6,Let the patch dry thoroughly — about 30 minutes in the sun. Pack up your tent and plan your next outdoor adventure.