Assemble a Party Tent

1,Remove the pieces from their packaging and sort the poles in order of their letter or number markings.

2,Lay out the joint pieces spaced roughly where they should be when the tent is complete.

3,Lay out the poles according to the assembly instructions, paying close attention to top, center and sidepieces.

4,Affix the roof pieces to the joints by sliding them into the joint holders.

5,Cover the roof with its corresponding fabric securing it into position with its ties.

6,Insert the side poles into the joints and erect the tent.

7,Tie down the bottom pieces of the white party tent‘s fabric to the side poles.

8,Place the tent’s feet over the bottom of the side poles and lock them into place with their pegs.

9,Stake the feet into the ground with the tent stakes. In most ground types, you should be able to simply step on the stake for insertion. If the ground is hard, use a mallet.

10,Attach the party tent‘s side fabric and tie it into position; this is typically done with the same ties used for the roof. Be sure and secure both the top and sides of the walls.