How to change speed pro complete skateboard bearings?

1,Gather the proper tools. A pro complete skateboard key will work, but you can substitute a basic screwdriver and wrench.
2,Remove the wheels with your skate key. If you have shields installed, you must remove those as well. Keep your spacers, if you are using them, to use with the new bearings.
3,Apply pressure with the speed pro complete skateboard axle to pop the bearings off. You can also use a screwdriver or a skate key that includes a removal nub, but the easiest way is to slowly pry the bearing out with the axle. Make sure only the tip of the axle is inside the bearing and it is not touching the wheel.
4,Pry the bearing out carefully if you want to save the part. If you are throwing your bearings out, then you can apply more pressure, which may cause damage. Just be careful not to hurt the wheels.
5,Repeat prying each bearing out with the axle until all eight bearings have been removed.