Install Safety Netting on Jumpking Trampolines

1,Set up a ladder afterward to the trampoline so you tin approach the altitude of the poles.

2,13ft trampoline spring cover,Climb up the ladder and clear the belt from the 1st pole. Take the hook from the strap out of the ring by the top of the pole.

3,13ft trampoline pad,Repeat steps 1 and two as the straps on the leftover of the poles.

4,Walk approximately the circle of the trampoline plus clear the belt hooks from the "V" rings.

5,15FT Trampoline net,Take the new netting out of the archive plus sort it on the trampoline.

6,Connect the 1st belt to the altitude of the 1st pole. Climb the stepladder plus afterwards insert the anchor into the ring. Repeat this step apt connect the straps apt the spare of the poles.

7,Connect the straps as the safety netting to the base of the poles. Wrap the belt nearly the pole plus then insert the fasten from the 1st belt into the "V" ring on the fringe of the trampoline.

8,Connect the remnant of the straps apt complete the project.