Put a Trampoline in the Ground

one,Place your trampoline where you plan apt use it. Pick an area with at least five feet of space between entire of the trampoline edges and any buildings, fences alternatively cars.

2,12ft trampoline safety net,Determine the position for the corkscrew anchors. Locate four positions approximately a foot away from the trampoline by every of its sides. Use the measuring tape to assure that every of these positions namely one foot away from the trampoline.

3,Mark each of these positions with a marking peg You can substitute sticks or pencils.

4,15 foot trampoline enclosure net,Insert the first corkscrew anchor into the ground Remove one of the marking pegs and within its position begin screwing one of the corkscrew anchors into the layer If necessary use the shovel apt crash open the floor onward inserting the anchor. Repeat this tread for the 3 remaining anchors.

5,Decide whether apt use ligature apt anchor your trampoline,12ft Trampoline pad, and take the measuring tape and amount off 4 2-foot long sections of ligature Then use the scissors apt mow the ligature.

6,Tie the first anchor apt the trampoline. Take one of the sections of cord alternatively bungee cords) and attach it to the corkscrew anchor. If using ligature tangle a double knit Then affix the additional annihilate of the cord alternatively bungee cord to the boundary of the trampoline too using a double knit Pull the cord taut along tying it to the trampoline's boundary Repeat this tread for the three remaining anchors.

7,Cut the frayed ends of the cable If you acclimate cable apt anchor your trampoline,neat away excess portions of the cord from the knots. Leave approximately two inches aboard every end of the ropes to discourage slippage.