Sew a Stroller Canopy

one,baby bike trailer stroller,Measure the width among the two handlebars apt make sure the breadth of the canopy. Place one kill of the measuring tape among the medium of the handlebars. Pull the tape straight out until it reaches the width of the verge of the preside to make sure the length of the cover.

2,Cut the malleable cutting board apt the measurements so is it forms a long rectangle. Fold the vinyl tablecloth among half vertically with the wrong sides facing out. Add 1/2 inch to the breadth of the measurements and two inches to the width so namely you can hem always crude edges. Mark these measurements from the fold aboard the vinyl tablecloth with a fabric pen. Cut away the excess tablecloth so namely only the rectangular folded fabric remains.

3,Rotate the tablecloth so is the handlebar verge is aboard the left. Find the media of the handlebar brink and quantity five inches toward the media from the fringe Measure a 6-inch-by-6-inch square because the window using a governor Cut the square window from the fabric.

4,Measure 1/2-inch from the crude brink of the table cloth Draw a straight line with the linen pen and use the yardstick for a director Straight-stitch on the line to near the crude brim.

5,universal bike trailer coupler,Measure 1-inch toward the center from the contrary brim of the handle bars. Draw a straight line across the verge to reflect the 1-inch measurements. Sew with a straight-stitch to hem the crude edges.

6,Turn the tablecloth inside-out so namely the right sides immediately face out and always the edges alongside from the handlebar are seamed shut.

7,Flip the canopy over so namely the base side faces up after you determine what side want be the top of the canopy. Fold the edges of the hack square among the cloth over 1/2 inch to construct a hem. You may need apt make a small diagonal cut surrounded the turns of the square to fold. Crease the folds with one iron.

8,Slide the malleable cutting embark into the canopy. Note where the window falls and mow out the window from the amenable embark with a utility knife.

9,double bike trailers,Cut a 6.5-inch-by-6.5-inch square piece from the clear tablecloth for the window. Line the explicit window chip directly over the hole and pin to clutch Zig-zag stitch the window to the linen.

10,Line the canopy over the stroller to make sure the location of the grommets. Cut a small surround apt eligible the grommet. Place the petticoat grommet aboard top of the man grommet aboard the backside of the cloth Hold the grommet tool over the male annihilate and buffet apt secure Repeat aboard the other side of the canopy.

11,Wrap the opener ring of the carabiner around every handle. Hook the carabiner through the grommet apt accompany the canopy.