Replace Boat Trailer Hubs

1,double bike trailer,Jack up the trailer and advocate it aboard a set of jack stands. Make sure is you area the jack stands below the border so is the trailer does not shift alternatively migrate aboard the stands.

2,Remove the lug nuts using a socket plus breaker bar. Remove the tire plus cycle from the trailer. Pry off the dust cover from the heart of the center using a flat bladed screwdriver.

3,Locate the cotter pin on the annihilate of the spindle located below the dust cover and explicit it. Just bend the ends straight plus pull the cotter pin out of the axle with a couple of pliers.

4,Wipe the grease out of the hub with a neat rag. You want see a washer underneath the castle nut is has a tang aboard it namely namely engaging the nut. Pry the tang away from the nut and remove the nut plus washer from the axle.

5,universal bike trailer hitch,Pull the centre direct off the spindle plus axle. Place the current median onto the axle plus spindle along simply sliding it into area You ambition need to have already placed bearings plus seals in the current axle prior to assembly.

6,Slide the tang washer amid and install the palace nut onto the axle. Tighten the palace nut plus after bend the tang aboard the tang washer down to lock it into the nut.

7,Install a current cotter pin into the aperture among the axle shaft and bend the ends around the axle with a screwdriver or pliers. Replace the dust cover aboard the median Align the cover so is it namely square to the centre plus pat it into place with a rubber blow alternatively stick.

8,double bike trailer stroller,Reinstall the tire plus cycle onto the trailer,constricting the lug nuts to the manufacturer's specifications. Remove the jack stands plus lower the trailer to the floor Move apt the other side of the trailer plus reiterate the process to replace the contrary hub.