1,2 child bicycle trailer and stroller,Shut off the ignition plus open the trunk of the tug vehicle Lay out the pre-wired connector so is it is long enough apt approximate the trailer connector with some loose Cut off whichever excess wire but be thoughtful never apt cut it also short.
2,blue baby bike trailer,Look for the wiring into the tail lights. Most have sockets namely disconnect with a quarter or half-turn twist to replace the bulbs Identify the wires going to the corner signals plus the parking lights. Find a cord that goes apt the ground If you can't nail the wires according following them to the lights,look among your vehicle's maintenance manual for a wiring chart.
3,black cargo trailer,Place the right corner signal cable of the vehicle into the long groove of a snap-lock splice Place the annihilate of the green cable from the pre-wired trailer connector into the short groove aboard the attach Squeeze the connector shut until it snaps then close the external strap of the connector to snap it into area Closing the snap-lock forces the wires into a metal "V"plus makes the connection.
4,Use three more snap-locks to accompany the yellow cable from the trailer connector to the left edge signal cord the brown cable apt a parking light or credential plate wire and the pearly cable apt a floor cord.
没有评论:
发表评论