Build a Cot for Camping

1,Lay the 2 6-foot widths of timber analogue a little over two feet apart This will acquaint the border of the cot. Place the 2-foot 3-inch pieces by the brain and foot of the border and bind them inside the two 6-foot lengths.

2,Reinforce the frame's corners with the truss plates. Place the truss plate so that almost half of it covers the joint among the 2-by-4s meantime the other half hangs off of the corner. Nail alternatively screw the plate down,next fold it approximately the corner and accompany it.

Repeat for the additional corners.

3,Lay out two of the 1.5 feet pieces so that they are analogue and approximately 2 feet six inches individually Place one of the 2-foot 6-inch pieces across the tops of them so that it creates a C form This is the basic leg architecture for the cot. Attach the thigh pieces to the 2-foot 6-inch chip at the corners.

Repeat for the remaining legs and the 2-foot 6-inch chip of lumber.

4,Place one of the thigh structures at the head of the border so that it looks like the cot namely lying upside down aboard the floor. Then,whirl the leg architecture as nevertheless you have folded it closed, so that the legs lie flat aboard the siteline and there are about 4 inches among the top of the thigh architecture and the head of the border.

5,portable camping cot,Screw two of the hinges apt the thigh structure and border so that you can fold and unfold the legs into their fitting positions.

6,Repeat treads four and 5 for the remaining leg architecture and hinges by the foot of the boundary.

7,Take a canvas metal strip and drill a nail-sized grasp aboard one abolish,approximately half an inch from every side. On the other end drill a aperture within the same position,yet tell a slit from one of the long sides straight among.

Repeat for the additional 3 canvas metal strips. These aspiration chance leg braces for the cot.

8,lightweight camping cot,Measure one of the thigh braces against the cot surrounded its standing position, it want go from inside the mattress border apt the inside of one of the legs. Place the strip so it creates a right-angle triangle, with the border and the leg making two of the sides. For best results,acquaint the corner angles as close apt 45 degrees for possible.

Nail the hole-end of the leg brace apt the boundary Nail the cut-end of the thigh brace apt the leg so that you can slip the brace off when you absence apt fold the cot closed.

Repeat for the other 3 legs.

9,camping cot with carrying bag,Stand the mattress up properly and extend the canvas over the border Tack the cloth apt the cot for tightly for possible.