How to Make Folding Table Legs?

1,Prepare your wooden tabletop and legs, however necessary, whether that be sanding, painting or staining. The brackets are a bronze-plated steel, so you will want to choose a stain or paint color accordingly.
2,Determine where you would like the legs of your folding table to be mounted. Measure and mark on the underside of the table where the outside corner of each leg will be, making sure they are all in the same location relative to their respective corners.
3,Attach the brackets to the legs of your folding table so that when the bracket is open, the part that attaches to the underside of your folding table is flush with the top of the leg. Do this by first lining up the bracket how it will be attached, marking the screw holes with your carpenter’s pencil, drilling pilot holes, and then screwing the bracket to the leg with the screws that come with the brackets.
4,Double-check your measurements and markings for each folding table leg before you begin to attach them. Put the legs in place on the underside of your tabletop according to the markings you made earlier, making sure that each leg is facing in the direction it needs to face so that it will fold up under the table, and mark the screw holes for the bracket on the underside of your tabletop. Drill pilot holes for all of the screw holes, and then screw each leg/bracket combination in place, again with the screws that come with the brackets.