Sun shade sails install in several different orientations. You can mount asun shade sail flat, vertically to serve as a wall or with two opposite corners taller than the other two corners for an asymmetric design. All shade sails attach to a sturdy surface or post at all four corners. After your triangle sun shade sail has been in use for some time, it may stretch slightly from the blowing winds. At least two opposite corners need to stay tightly mounted so that the sail stays taunt, does not flap in the wind or hold rain water and deteriorate.
1,Remove the attachments from two opposing corners of the sun shade sail canopy. Unsnap a spring clip or chain from the D-rings on the shade sail corners and eyebolts on the corner posts. Untie both ends of a rope from both the shade sail D-rings and the eyebolts on two opposite corners.
2,Hold a turnbuckle with the hook openings on each end facing down. Hook one end on the square sun shade sail D-ring and the other end on the eyebolt in a corner post. Attach one turnbuckle in each of the opposite corners that you detached in Step One.
3,Insert a flat-head screwdriver into the center of one turnbuckle. There is a slot in the center with two threaded screws on each end. Turn the screwdriver clockwise two revolutions to tighten the turnbuckle. Tighten the second turnbuckles two revolutions in the same manner.
4,Tighten one turnbuckle and then the second one alternately in this manner until the shade sail is equally tight between the two opposite corners
没有评论:
发表评论